Search
Filters

S-45 STATIONARY MODEL

The technical specifications of the Gener S-45 model wind machine are given below.

PROPELLER

  • Propellers are produced with a diameter of 5.80 meters.
  • The propeller are made of Solid-Fiber.
  • It has high efficiency design.
  • It is manufactured as durable and long-lasting.
  • Balanced by accurate measurement of static moment with respect to oscillation.

TOWER

  • It is 10.50m long
  • The tower diameter is 510mm.
  • Tower sheet thickness is 6mm.
  • It is made of hot-dip galvanized.
  • There are 4 maintenance frames.


DIESEL AND LPG ENGINE OPTIONS

  • It provides first class fuel consumption efficiency.
  • It has a low dB level.
  • It provides maximum power and torque production at low rpm.

GEAR BOXES

  • It has a cast iron frame.
  • TIMKEN brand bearings are used.
  • It has an upper gearbox that can rotate 360° around the tower in 4.5 minutes.

CABIN

  • It has a special design for easy carrying.
  • It is manufactured to be resistant to weather conditions.
  • Special twisted galvanized sheet is electrostatic powder painted.
  • It has an integrated 450lt fuel tank.

CONTROL SCREEN

  • Our machines are equipped with Deep Sea Electronics DCU.
  • There are automatic and manual usage mode alternatives.
  • It has been prepared in different languages ​​to be user-friendly.
  • It has a notification feature of potential faults.

SHAFT

  • It is manufactured in 3 parts as balanced (3x3.02mt).
  • It is 100mm in diameter.

CLUTCH

  • It is 10" in diameter.
  • Produced in accordance with industrial standards.

SAFETY EQUIPMENT AND SENSORS

  • It is fully integrated with the DCU.
  • Anemometer is included for safe operation in windy conditions.
  • There is an integrated vibration switch on the tower to prevent the tower from tipping over.
  • It has temperature sensor integration.

OPTIONS

REMOTE CONTROL

  • Equipped with the ability to view and control on a smartphone.
  • It is designed to be compatible with IOS and Android software.

LAy-DOWN TOWER

  • It is manufactured in two parts (1.75+8.75m length).
  • The tower is manufactured as epoxy painted.
  • It has a hydraulic tilting system.

 

The technical specifications of the Gener S-45 model wind machine are given below.

PROPELLER

  • Propellers are produced with a diameter of 5.80 meters.
  • The propeller are made of Solid-Fiber.
  • It has high efficiency design.
  • It is manufactured as durable and long-lasting.
  • Balanced by accurate measurement of static moment with respect to oscillation.

TOWER

  • It is 10.50m long
  • The tower diameter is 510mm.
  • Tower sheet thickness is 6mm.
  • It is made of hot-dip galvanized.
  • There are 4 maintenance frames.


DIESEL AND LPG ENGINE OPTIONS

  • It provides first class fuel consumption efficiency.
  • It has a low dB level.
  • It provides maximum power and torque production at low rpm.

GEAR BOXES

  • It has a cast iron frame.
  • TIMKEN brand bearings are used.
  • It has an upper gearbox that can rotate 360° around the tower in 4.5 minutes.

CABIN

  • It has a special design for easy carrying.
  • It is manufactured to be resistant to weather conditions.
  • Special twisted galvanized sheet is electrostatic powder painted.
  • It has an integrated 450lt fuel tank.

CONTROL SCREEN

  • Our machines are equipped with Deep Sea Electronics DCU.
  • There are automatic and manual usage mode alternatives.
  • It has been prepared in different languages ​​to be user-friendly.
  • It has a notification feature of potential faults.

SHAFT

  • It is manufactured in 3 parts as balanced (3x3.02mt).
  • It is 100mm in diameter.

CLUTCH

  • It is 10" in diameter.
  • Produced in accordance with industrial standards.

SAFETY EQUIPMENT AND SENSORS

  • It is fully integrated with the DCU.
  • Anemometer is included for safe operation in windy conditions.
  • There is an integrated vibration switch on the tower to prevent the tower from tipping over.
  • It has temperature sensor integration.

OPTIONS

REMOTE CONTROL

  • Equipped with the ability to view and control on a smartphone.
  • It is designed to be compatible with IOS and Android software.

LAy-DOWN TOWER

  • It is manufactured in two parts (1.75+8.75m length).
  • The tower is manufactured as epoxy painted.
  • It has a hydraulic tilting system.

 

PROPELLER
Length 5.80m
TOWER
Thickness 6mm
ENGINE
143 Hp (105 kW)
PROTECTION AREA COVERAGE
SAFETY EQUIPMENT Available
OPERATION
Auto and Manual

Catalog